Corrosion Resistant Paint

Product Details:

We offer high quality High Temperature Corrosion Resistant Paint to our valuable customers. Available with us at affordable prices, these paints are highly appreciated for their ability to withstand extreme conditions of temperature, purity and compositional accuracy. Being a quality conscious firm, the optimum quality of the offered paints is maintained through various quality assurance tests conducted by our team of quality controllers.

Features:

• Temperature resistant
• Corrosion proof
• Free from contamination
• Protects the metal surfaces from corrosion at high temperatures upto 600 °C (1100 °F)
• Additional Property of resisting fire
• Air drying coating
• Does not require any special techniques for application

Recommended for corrosion protection for:

• High heat stacks, Chimneys, Pipe lines
• Boiler Jackets, Heat exchangers, Drying kilns, Ovens, Furnaces
• Hot rolling mill machineries
• Automobile engines and silencers
• Turbines & other machines of power generating units
• High Voltage Electrical Transmission Line

Technical Data:

• Color: Metallic Aluminum
• Coverage: 15 to 20 m² per Litre
• Coating Thickness: 30 +/- 5 microns DFT per coat
• Method of Application: Brush, Air Spray, Airless Spray, Dipping, Flow Coating, Curtain coating, Tumbling etc

Film Properties:

• Drying Time (air dry): Touch Dry 60 minutes; Hard Dry 24 hours
• Over coating interval with self: 24 Hours
• Finish: Glossy and smooth
• Water Resistance: Excellent
• Acid Resistance: Excellent (3% HCl, 3% HNO3, 3% H2SO4)
• Alkali Resistance (3% NaOH): Excellent
• Solvent Resistance: Excellent
• Adhesion (by cross hatch method): 100%
• Flexibility: Passes O T bend test
• Scratch Hardness: 1000 gms
• Impact Resistance: more than 60 Kg cm
• Weather Resistance: more than 6 years
• U/V resistance: Excellent
• Dry Heat Resistance: Continuous 600 °C (1100 °F)

Application Procedure and Other Details:

• Mixing: The paint is supplied in two separate containers Pack (A) and Pack (B). Shake well both the containers before use. Mix the components in proper ratio by uniform Stirring. Once the components are mixed ,it must be used within working pot life period
• Mixing Ratio: 1: 1 by Volume
• Working Pot Life(at various temp.): 2 Hours (below 25 °C); 1.5 Hours (upto 40 °C); 1 Hour (above 40 °C)
• Method of Application: The paint can be applied by any method e.g. brush, Air spray, Airless Spray, Roller, Dipping Flow coating, Curtain coating, Tumbling etc
• Film Thickness: The wet film thickness (WFT) should not be less than 50 microns
• Thinner: Use G-Tech Thinner for thinning the paint. Do not thin more than required

Passes following standard:

• IS 13183:1991 for Grade-1 Aluminum Heat resistant paint

Product Details:

We are instrumental in offering optimum quality Corrosion Resistant Paint to our valuable customers. The offered paints are manufactured in compliance with the international quality standards by using advanced machinery installed at our infrastructural facility. Owing to their longer shelf life and compositional accuracy, these paints are highly demanded in the market.

Features:

• Corrosion proof
• Temperature resistant
• Accurate composition
• Protects the metal surfaces from corrosion at high temperatures upto 1000 °C (1832 °F)
• Additional Property of resisting fire
• Air drying coating
• Does not require any special techniques for application

Recommended for corrosion protection for:

• High heat stacks, Chimneys, Pipe lines
• Boiler Jackets, Heat exchangers, Drying kilns, Ovens, Furnaces
• Hot rolling mill machineries
• Automobile engines and silencers
• Turbines & other machines of power generating units
• Fighter planes, Jets
• Mould release coating for Metal Casting
• High Voltage Electrical Transmission Line
• Anti-Splatter Coating for MIG wielding

Technical Data:

• Color: Metallic Aluminum
• Coverage: 15 to 20 m² per Litre
• Coating Thickness: 30 + 5 microns DFT per coat
• Method of Application: Brush, Air Spray, Airless Spray, Dipping, Flow Coating, Curtain coating, Tumbling etc

Film Properties:

• Drying Time (air dry): Touch Dry 60 minutes Hard Dry 24 hours
• Over coating interval with self: 24 Hours
• Finish: Glossy and smooth
• Water Resistance: Excellent
• Acid Resistance: Excellent (3% HCl, 3% HNO3, 3% H2SO4)
• Alkali Resistance (3% NaOH): Excellent
• Solvent Resistance: Excellent
• Adhesion (by cross hatch method): 100%
• Flexibility: Passes O T bend test
• Scratch Hardness: 1000 gms
• Impact Resistance: more than 60 Kg cm
• Weather Resistance: more than 6 years
• Salt Spray Test (100 hours): Passes the test
• U/V resistance: Excellent
• Dry Heat Resistance: Continuous. 900 °C (1652 °F); Intermittent 1000 °C ( 1832 °F )

Application Procedure and Other Details:

• Mixing: The paint is supplied in two separate containers Pack (A) and Pack (B). Shake well both the containers before use. Mix the components in proper ratio by uniform Stirring. Once the components are mixed, it must be used within working pot life period.
• Mixing Ratio: 1 : 1 by Volume
• Working Pot Life (at various temp.): 2 Hours (below 25 °C); 1.5 Hours (upto 40 °C); 1 Hour (above 40 °C)

Passes following standards:

• IS 13183: 1991 for Grade-1 Aluminum Heat resistant paint
• BS 476-Part 5-1979 Test for ignitability (Fire test on building materials)
• ANSI/IEEE Standard 383-1974 Test for Class IE Electric Cables, Field Splices and connections for Nuclear Power Generating Stations
• BS 476- Part 7 Test for Surface spread of flame
• IS 12777: 1989 Test for flame spread of product
• NFPA 255 Test for fire retardant coating
• ASTM-E84: 98 Test for fire retardant coating
• UL 723 Test for fire retardant coating